Czy macie jakieś informacje na temat pracy w tej firmie? Jak wygląda atmosfera? Czy wynagrodzenie jest dobre? Czy są jakieś benefity? Jakie są warunki pracy? Z góry dzięki!
As a Senior Electrical Engineer, you will work closely with your team to support technical solutions for EPC projects and tenders. Experience with PowerFactory, Etap, or other dimensioning systems would be ideal but it is not a must-have requirement. Additionally, you will be responsible for supporting the design and dimensioning of Low Voltage (LV) power systems, including AC and DC switchboards, UPS/Rectifier and Battery systems, Light Distribution, Small Power, Lightning Protection, Earthing/Bonding, Heat Tracing, Cables and Cableways throughout the construction process. As a member of our technical Low Voltage (LV) team in the Offshore Wind Business area, you will be part of a team that has delivered one of the largest project portfolios of offshore substations in Northern Europe. Our reach extends across Europe, Taiwan, and the USA, so you can expect to be involved in exciting projects with a global scope
Your key duties will include:
• Participate in worldwide Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT)
• Collaborate closely with vendors in the EPC projects to ensure prompt and accurate delivery of technical documentation for UPS and switchboards
• Close cooperation with other disciplines to gain a comprehensive understanding of system interfaces
• Perform battery and load calculations as necessary to ensure accurate delivery from vendors
• Close collaboration with procurement to ensure technical alignment during the RFQ phases
• Ensure that the technical quality of vendor documentation for switchboard and UPS manufacturers is up to the required standards
• Conduct a thorough evaluation of cables to ensure compliance with relevant standards and suitability for the designated area of use
• Be part of the project team and contribute to the delivery of low voltage systems for EPC projects
You will advise on- and do contractual work primarily in relation to our offshore energy business and will also be supporting our procurement department. At the same time, you will be advising the business directly on a wide variety of commercial, legal and risk management issues
Your tasks will include but are not limited to:
-Providing high quality legal advice, based on a sense of thoroughness
-Influencing decisions regarding commercial and legal issues
-Drafting and negotiating commercial contracts, sometimes with demanding deadlines
-Being the responsible lawyer in case-processing for one or more offshore business divisions, both in-house and externally
Main tasks/areas of responsibility: Contract Management within the Renewables Department. You will be responsible for managing EPC Contract and also supporting Procurement Leads in drafting and negotiating procurement contracts
Main principal duties:
• Drafts, negotiates and manages procurement contracts and key documents (warranties, guarantees, bonds)
• Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
• In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
• Ensures that contracts are executed in accordance with company guidelines and industry best practices and are in line with corporate goals, objectives
• Manages existing client contracts, including overseeing and monitoring;
• In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
• Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation of liabilities
• Prepares reports on the status of contracts for management
• Interface and coordinate with internal and external project team members and document communications between the company, subcontractors, suppliers, and clients
• Ensure that the proper document templates are used for contract and change management
Minor tasks/areas of responsibility:
• Identifies potential improvements to existing policies and contract standards
• Applies best practices for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
• Communicates contract implementations to project teams, Procurement and other stakeholders
Authority/decision-making competence:
• In accordance with Chart of Authority
• As delegated by the Procurement Director and Project Manager
The Associate Category Manager plays a vital role in developing, managing, and enhancing the strategic category and contracting aspects across assigned categories and sub-categories. This involves collaboration with internal stakeholders (e.g., technical leads, tender teams, solutions engineers) and key suppliers aligned with Renewables and Product Line (PLM) strategies
As an Associate Category Manager, you will lead the strategic application of procurement levers within all categories and be a key driver of the SRM initiative. This includes activities such as supply market analysis, commercial and contractual negotiations, cross-category consolidation, ongoing benchmarking, and availability assessments
• Establish own categories in the Renewables division
• Analyse and Lead Cross category consolidation for all categories supporting the Category development. Lead RFQ process for client tender phase and take lead on developing pricing output from our Tacton configuration tool
• Engages with Suppliers and builds a close cooperation to enable our Product line configurator
• Ensures Suppliers involvement in developing and maintaining PL solutions’ availability and market competitiveness
• Acts as first line of support for commercial questions within the categories
• Ensures awareness of Category Contracts in the supply chain
• Collaborates with Purchasing and Contract Managers in drafting and negotiating all requirements and provisions in Framework agreements
• Manages existing Framework agreements, including overseeing and managing:
- Contract performance, progress, and compliance (in collaboration with Category managers, Project Procurement Leads, Solutions Engineers and technical leads)
- Ensure category benchmarking, pricing updates and capacity availability
• In collaboration with Solutions Engineers and technical leads identifies, assesses, and manages Category roadmap
Minor tasks/areas of responsibility:
• Applies best practice for lessons learned to ensure experience exchange and capability building within your areas
• Conduct assignments as assigned by direct manager
• Prepares reports on the status of Category for management
• Contract Management of EPC Contracts signed under the terms and conditions of FIDIC Yellow Book
• In collaboration with the Project Management Team identify, assess and manage contract risks with a focus on commercial risks
• Secure that contract obligations from Employer’s contracts are cascading down to procurement contracts
• Evaluate claims against contractual obligations, coordinate and document findings
• Claim management
• Draft and negotiate contract variations,
• Review and negotiate contract amendments
• Coordinate with Cost Control and Finance to ensure proper cost accounting, invoicing and milestone payments
• Prepare management reports on the status of project contracts
• Interface and coordinate with internal and external project team members and document communication between the company, subcontractors, suppliers and clients
• Identify potential improvements to existing policies and contract standards
• Apply best practices for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
Key criteria for success:
• Client and key stakeholder requirements are met
• Business and project goals are reached by successful contract implementation
• Contract change management is in control at all times
• Proactive participation in project activities
• Establish correct contract document structure within project systems and tools
Despite the title of “Mechanical engineer” you will be working with multi-disciplinary systems such as Diesel generator systems, Diesel fuel systems where knowledge and understanding of all discipline areas within these systems is essential – Mechanical, Electrical and Control. Moreover, an important part of this position also includes aligning with external and internal stakeholders when creating proposals, technical solutions and carrying out project documentation
Your tasks will include but are not limited to:
• Producing and being responsible for design solution, documentation and purchase together with our procurement department
• Coordinating and troubleshooting with the customer, suppliers and project disciplines
• Facilitating and participating in client workshops and meetings to ensure that scope and technical solutions are aligned with the contract
• Clarifying client requirements within the tender and the project phase
• Ensuring the execution and sign-off of factory (FAT) and site (SAT) tests are carried out with customers, according to the overall project plan
• Participating in concept development and optimization of technical solutions
You will join a team of highly specialised and motivated employees located in our telecom team in the Products & Technology business area, where we for more than 40 years have supplied telecom solutions to the energy sectors. Our marked is both the Renewable sector and the O&G sectors in Northern Europe, Asia and the USA, which means that you can expect to be involved in projects worldwide
Your primary work location will be in our Gdynia (Poland) office with regular visits to our head office in Esbjerg (Denmark)
The job will also involve some travelling to other Semco Maritime offices, sub-suppliers and occasional to sites
You will ensure that all telecom project-related tasks are completed, meeting our high-quality standards, in time and within project contracts
Your key roles and tasks will include:
• Design and engineering of telecom solutions for our energy customers
• Lead or participate in telecom feed studies and experience in different telecom calculation software such as coverage simulation software (ATDI), CadnaA and similar
• Lead or participate in design and engineering of Telecom Systems in cooperation other specialists
• Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering and PC Schematic for Cabinet design
• Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
• Perform programming and configurations of telecom systems at our facilities
• Perform and participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
• Service, customer support and troubleshooting on delivered projects
• Contract Management of EPC Contracts signed under the terms and conditions of FIDIC Yellow Book
• In collaboration with the Project Management Team identify, assess and manage contract risks with a focus on commercial risks
• Secure that contract obligations from Employer’s contracts are cascading down to procurement contracts
• Evaluate claims against contractual obligations, coordinate and document findings
• Claim management
• Draft and negotiate contract variations,
• Review and negotiate contract amendments
• Coordinate with Cost Control and Finance to ensure proper cost accounting, invoicing and milestone payments
• Prepare management reports on the status of project contracts
• Interface and coordinate with internal and external project team members and document communication between the company, subcontractors, suppliers and clients
• Identify potential improvements to existing policies and contract standards
• Apply best practices for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
Key criteria for success:
• Client and key stakeholder requirements are met
• Business and project goals are reached by successful contract implementation
• Contract change management is in control at all times
• Proactive participation in project activities
• Establish correct contract document structure within project systems and tools
Developing sales in international markets; responsible for achieving sales targets
Managing customer relationships; searching for and acquiring new customers, building long-term business relationships, and understanding needs and strategies
Market research; analyzing market conditions, tracking potential market changes, and identifying potential market segments and customers
Coordinating marketing activities, including creating marketing strategies for targeted market segments and individual clients
Collaboration with all departments in the company; including participating in setting strategies, and developing new areas of activity
As a Junior Project Planner, you will be responsible for supporting the planning and scheduling activities throughout the whole project portfolio, working under the guidance and supervision of head of planning and experienced planners
Your tasks will include assisting Project Planners in:
• Preparing weekly or monthly reports for internal and external purposes
• Preparing schedule data for tender proposals, contract negotiations and weekly/monthly progress updates once the project has been awarded
• Identifying project milestones, deliverables, and other important deadlines
• Ensuring that schedules and reports are organized properly and up to date
In addition, you will support the Head of Planning with:
• Data management and quality checks to facilitate department-level resource planning and reporting, maintenance of related software systems
• Preparation of presentations and project portfolio-level reporting
• Other small administrative tasks
You will also attend weekly and monthly coordination meetings with internal and external stakeholders
As a Senior Electrical Engineer, you will work closely with your team to support technical solutions for EPC projects and tenders. Experience with PowerFactory, Etap, or other dimensioning systems would be ideal but it is not a must-have requirement. Additionally, you will be responsible for supporting the design and dimensioning of Low Voltage (LV) power systems, including AC and DC switchboards, UPS/Rectifier and Battery systems, Light Distribution, Small Power, Lightning Protection, Earthing/Bonding, Heat Tracing, Cables and Cableways throughout the construction process
As a member of our technical Low Voltage (LV) team in the Offshore Wind Business area, you will be part of a team that has delivered one of the largest project portfolios of offshore substations in Northern Europe. Our reach extends across Europe, Taiwan, and the USA, so you can expect to be involved in exciting projects with a global scope
Your key duties will include:
• Participate in worldwide Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT)
• Collaborate closely with vendors in the EPC projects to ensure prompt and accurate delivery of technical documentation for UPS and switchboards
• Close cooperation with other disciplines to gain a comprehensive understanding of system interfaces
• Perform battery and load calculations as necessary to ensure accurate delivery from vendors
• Close collaboration with procurement to ensure technical alignment during the RFQ phases
• Ensure that the technical quality of vendor documentation for switchboard and UPS manufacturers is up to the required standards
• Conduct a thorough evaluation of cables to ensure compliance with relevant standards and suitability for the designated area of use
• Be part of the project team and contribute to the delivery of low voltage systems for EPC projects
Supporting management with project time management, assuring that projects are executed on time and key deadlines are met
Maintain pro-active communication with other planners and management teams of vendors, consortium partners and clients to ensure that project programme is aligned continuously with all project stakeholders
Following up on internal progress from engineering and construction teams and setting up and running internal reporting towards Project Management and company’s Steering Committee, in accordance with internal standard guidelines
Maintain the project programme in Primavera P6, updating progress, maintaining baselines, running analysis on possible scenarios of project execution and issuing monthly progress reports with accurate and valid data to clients in a concise and timely manner
Helping the project team forecasting resource demands and assuring that allocated resources to the project are in line with constant changes of project time-schedule
Team Lead Low Voltage Power for Offshore Substations
Kadłubowców 2, Śródmieście, Gdynia
Wygasła: 27.09.2023
full-time
umowa o pracę
hybrid work
manager / supervisor
Obowiązki:
As a valuable team member, you will provide technical support and assistance to your colleagues, offering guidance and expertise whenever needed for project tasks. Additionally, you will assist the Head of the department in monitoring team performance, ensuring that objectives are met effectively. Furthermore, you will play a pivotal role in supporting the onboarding process and screening potential new employees, contributing to the growth and success of the team. Your key duties will include:
You will be responsible for managing and supporting a team to achieve their goals and foster a collaborative work environment
Ensure consistent technical solutions across our project portfolio (consisting of 7-9 projects) to promote coherence and efficiency
Provide support to the Product Line (Engineering Innovation Team) in evaluating and enhancing the effectiveness of new working methodologies. Offer valuable insights and information regarding areas that require improvement to drive continuous enhancement
Broad technical experience within Low Voltage systems including Switchboards, UPS/DC systems, Lighting, Earthing/Bonding, lightning, cables, heat tracing
Responsible for developing and keeping our technical requirements and specifications up to date with inputs from internal and external stakeholders
Help shaping our culture within the team and organization
Provide assistance in projects where it is required
As our new Mechanical Engineer, you will primarily be involved in the design and development of mechanical solutions for EPCI (Engineering, Procurement, Construction and Installation) contracts for offshore substation projects. An important part of this position also includes aligning with external and internal stakeholders when creating proposals, technical solutions, and carrying out project documentation
Your tasks will include but are not limited to:
Produce and take ownership of design solutions, documentation, and purchasing in collaboration with the procurement department
Coordinate and troubleshoot with customers, suppliers, and other project disciplines
Facilitate and actively participate in client workshops and meetings to align scope and technical solutions with contractual requirements
Ensure successful execution and sign-off of factory (FAT) and site (SAT) tests in accordance with the project plan
Participate in concept development and optimize technical solutions
Prepare technical documentation, reports, and drawings to effectively communicate design concepts and specifications
Assume responsibility for cost, hours, and quality control of mechanical systems in projects
Contribute to continuous improvement of engineering processes, tools, and methodologies, including participating in lessons learned sessions and the development of engineering standards and guidelines
Vital contact: Structural & Mechanical Engineering team
Low Voltage Site Engineer for our Renewables Division
Kadłubowców 2, Śródmieście, Gdynia
Wygasła: 22.06.2023
full-time
umowa o pracę
full office work
specialist (Mid / Regular)
Obowiązki:
Your position:
As our new Low Voltage Site Engineer in the Renewables Division, you will be a crucial part of our Site Operations Team, comprised of highly skilled and experienced power engineers. With one of the largest project portfolios in offshore substations worldwide, we are proud to be market leaders in our industry
In this role, you will supervise teams of 5-15 members in the installation, testing, and commissioning of low voltage projects while also getting hands-on with the construction of low voltage components. You will act as the vital link between our HQ engineering team and onshore construction sites and have the exciting opportunity to develop your project management skills in an international environment
“As a member of our team, you'll be working alongside a close-knit group of dedicated people who are at the forefront of the green energy transition. You'll have the exciting opportunity to work with large-scale, specialized engineered platforms, and our focus on quality and safety is unmatched,”- says Peter Carlsen, Director, Site Operations
Your tasks & responsibilities:
You will be responsible for leading the low voltage scope of the project, overseeing time and budget management, and acting as a liaison between stakeholders to ensure the project's successful completion
Your tasks will include but are not limited to:
- Working on onshore sites and carrying out LV installation and test schemes
- Supervising installation teams
- Interacting with the engineering department in providing support, troubleshooting and solving technical issues onsite
- Planning of day-to-day tasks
- Ensuring that projects are delivered on time and within budget
- Communicating with subcontractors, clients and stakeholders across the project organisation
Low Voltage Lead Engineer for Offshore Substations
Kadłubowców 2, Śródmieście, Gdynia
Wygasła: 22.06.2023
full-time
umowa o pracę
full office work
specialist (Mid / Regular)
Obowiązki:
Your role:
Semco Maritime, a multinational company in the offshore wind projects industry, is looking for an Offshore Substation Low Voltage (LV) Lead Engineer who will be responsible for managing the Low Voltage system design of an offshore substation. As a part of the Semco Maritime team, you will be involved in technical solutions ranging from project development to supporting design and development execution throughout all phases of the projects. Our reach extends across Europe, Taiwan, and the USA, so you can expect to be involved in exciting projects with a global scope
“Joining Semco Maritime means becoming part of a dynamic and constantly evolving work culture. With plans to double our activities in the coming years, each workday offers an exciting and challenging opportunity to achieve results through a shared commitment to professionalism and dedication. At Semco Maritime, we believe in teamwork and winning together,” says Stefan Åkesson, Head of Low Voltage
You tasks & responsibilities:
As a LV Lead Engineer, you will be part of the value chain, interfacing with multiple disciplines and working on technical solutions ranging from project development to supporting design and development execution throughout all phases of the projects
Your tasks will include but are not limited to:
- Ensuring timely and high-quality delivery of technical designs
- Managing document delivery throughout the project lifecycle for the Low Voltage (LV) system, encompassing LV Switchboards, UPS/DC systems, Light Distribution, Small Power, Lightning Protection Earthing/Bonding, Heat Tracing, and Cableways
- Monitoring and reporting on document progress and milestone achievements for the Low Voltage (LV) scope of work in EPC and Product line projects
- Keeping technical requirements and specifications up to date by gathering inputs from internal and external stakeholders
- Contributing to the development of team and organizational culture
- Taking responsibility for the design, time schedules, procurement, and certain aspects of commissioning for Low Voltage (LV) systems in EPC projects
- Managing suppliers, negotiations, and contracts in collaboration with the procurement department
- Attending Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), commissioning, and handover of Low Voltage (LV) projects to clients and their Operations & Maintenance (O&M) organizations
- Providing consultancy services
- Developing, optimizing, and standardizing technical solutions
- Participating in Front-End Engineering Design (FEED) and feasibility studies
Senior Low Voltage Engineer for Offshore Substations
Kadłubowców 2, Śródmieście, Gdynia
Wygasła: 22.06.2023
full-time
umowa o pracę
full office work
senior specialist (Senior)
Obowiązki:
About project:
In your new position as Senior Low Voltage Engineer, you will be a valuable member of our technical Low Voltage (LV) team in the Offshore Wind Business area. Here, you will be part of a team that has delivered one of the largest project portfolios of offshore substations across Europe, Taiwan, and the USA - so you can expect to be involved in exciting projects with a global scope
You will have the exciting opportunity to pursue a rewarding career in the field of offshore wind projects, working closely with your team to deliver low voltage systems for EPC projects and tenders. Above all, your work will make a real difference in meeting the world’s growing energy demand
“As part of the Semco Maritime Renewables team, you will experience an informal environment that values freedom and trust, as we believe that this approach leads to sustainable performance. With plans to double our activities in the coming years, every day at Semco Maritime presents an exciting and challenging opportunity to achieve results through a shared commitment to professionalism and dedication. We believe in working together as a team and achieving success as a group,” says Stefan Åkesson, Head of Low Voltage
Your tasks & responsibilities:
As a Senior Electrical Engineer, you will be responsible for supporting the design and dimensioning of LV power systems, including AC and DC switchboards, UPS/Rectifier and Battery systems, Light Distribution, Small Power, Lightning Protection, Earthing/Bonding, Heat Tracing, Cables and Cableways throughout the construction process
Your tasks will include but are not limited to:
- Participating in worldwide Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT)
- Collaborating closely with vendors in the EPC projects to ensure prompt and accurate delivery of technical documentation for UPS and switchboards
- Cooperating closely with other disciplines to gain a comprehensive understanding of system interfaces
- Performing battery and load calculations as necessary to ensure accurate delivery from vendors
- Collaborating closely with procurement to ensure technical alignment during the RFQ phases
- Ensuring that the technical quality of vendor documentation for switchboard and UPS manufacturers is up to the required standards
- Conducting a thorough evaluation of cables to ensure compliance with relevant standards and suitability for the designated area of use
At Semco Maritime, you will be part of an evolving and dynamic working culture and an attractive workplace with an informal environment based on a high degree of freedom and trust, as we believe this better unleashes what we call sustainable performance
As part of the HV team, I get to contribute to some of the largest offshore substations the world has ever seen. It keeps me motivated when I am faced with many exciting electrical and mechanical challenges. I love to see "my" platforms come to life and experience the direct impact that these substations have on the green energy supply globally
High Voltage Project Lead, Nicklas Holm
Your tasks & responsibilities:
In the role as a High Voltage Engineer, you will have the opportunity to bring your knowledge into work in the core area of high voltage. Here, you will work with some of the brightest and most skilled power engineers in developing excellent technical solutions to our customers
Your tasks will include but are not limited to:
- Responsible for design, calculations and engineering of HV/MV equipment in our EPC projects
- Handling suppliers, negotiations and contracts in cooperation with the lead engineer and procurement department
- Attending FAT, SAT, commissioning and handover of projects to clients and their O&M organisations
- Development, optimization and standardization of technical solutions
• Aids Legal and Procurement in developing contracting standards, contract templates, and guidelines for managing both client and supplier contracts
• Supports Tender Manager and Sales with responses to bids, proposals and contract negotiations
• Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
• In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
• Ensures that contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
• Manages existing client contracts, including overseeing and monitoring;
Contract planning, performance, progress, and milestone achievement (in collaboration with and in support of Project Managers)
o Notifications and key documents (warranties, guaranties, bonds, etc.)
o Contract change management (variations, amendments, addendums, etc.),
o Contract close-out and claims management
• In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
• Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation liabilities
• Prepares reports on the status of contracts for management
• Interface and coordinate with internal and external project team members and document communications between company, subcontractors, suppliers, and clients
• Ensure that the proper document templates are used for contract and change management
• Cooperation with the client and Semco Maritime Document Control
Minor tasks/areas of responsibility:
• Identifies potential improvements to existing policies and contract standards
• Applies best practice for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
• Communicates contract implementations to project teams, Procurement and other stakeholders
Minor duties:
• Conducts special projects as assigned
Key criteria for success:
• Client and key stakeholder requirements are met
• Business and project goals are reached by successful contract implementation
• Contract change management is in control at all times
• Proactive participation in project activities
• Establish correct contract document structure within project systems and tools
As our new Tender Project Engineer, you will join our Global Tender team, consisting of nine team colleagues located in Denmark and Singapore. Our project offers range from DKK 0.5 million to DKK 100 million and covers everything from the newest network solutions to CCTV and entertainment systems. We are on a growth journey, and that is why you will play a key role in working with telecommunication tenders, ensuring that tenders meet our offshore customers' needs
"This is your opportunity to join a team of technical multi-disciplinary experts running offshore telecommunication tender projects for large international organisations. You will be involved in projects of different sizes all over the world, based on a team environment where we succeed together,” says Søren Rønne Barslund, Global Tender Manager
Your tasks & responsibilities
In your role as a Tender Project Engineer, you will be responsible for producing commercial and technical proposals for telecommunication systems based on customers’ inquiries and requirements
Your tasks will include, but are not limited to:
-Finding and documenting the right technical solutions while engaging with our technical teams, HSEQ, Procurement, and other relevant departments
-Preparing potential project risk analyses and working to increase profit margins
-Coordinating and gathering tender packages
-Assisting in sales and project execution assignments
Key criteria for success:
-Key stakeholder requirements are met
-Business goals are reached by successful Category contract implementation
You will be part of engineering the design of the most optimal electrical architecture based on topics such as cost of construction (CAPEX) vs. cost of operation (OPEX) optimization, availability, and redundancy – as well as guiding our client in making the most optimum overall decision. You will get the needed training and backup from the team
The studies typically cover the entire transmission system i.e., export and array cables layout plus onshore and offshore substations design and structure
Your key roles and tasks will include:
• Contributing to concept, feasibility, and due diligence projects – focus technologies are AC transmission, DC transmission, floating substations and offshore power2x
• Participating in design and calculations as well as grid code compliances
• Contributing to power system studies and load flow calculations
• Executing development tasks in general (improve power studies, concept studies, etc.)
• Engaging with stakeholders internally and eventually externally
You will be part of engineering the design of the most optimal electrical architecture based on topics such as cost of construction (CAPEX) vs. cost of operation (OPEX) optimization, availability, and redundancy – as well as guiding our client in making the most optimum overall decision. You will get the needed training and backup from the team
The studies typically cover the entire transmission system i.e., export and array cables layout plus onshore and offshore substations design and structure
Your key roles and tasks will include:
• Contributing to concept, feasibility, and due diligence projects – focus technologies are AC transmission, DC transmission, floating substations and offshore power2x
• Participating in design and calculations as well as grid code compliances
• Contributing to power system studies and load flow calculations
• Executing development tasks in general (improve power studies, concept studies, etc.)
• Engaging with stakeholders internally and eventually externally
Perform Requisition-to-Purchase Order process within IFS
Handling of the sourcing process for goods and services to Renewables and projects
Expediting of orders to ensure on-time deliveries
Handling of internal and external correspondence related to the procurement
Update IFS with order, invoicing, and supplier information
Interface and coordinate with internal and external project team members and document communications between Semco Maritime, subcontractors, suppliers, and clients
Establish and maintain procurement plans at the direction of, and in collaboration with the Project Manager
Ensure that the proper document templates are used for the project
Ad hoc assignments within the Procurement Department and Semco Maritime Poland office
• Participates in establishing global category management strategy for the Renewables division,
• Engages with Key Category Suppliers and builds reliable cooperation,
• Ensures Key Category Suppliers involvement in developing and maintaining PL solutions’ availability and market competitiveness,
• Acts as first line of support for all commercial questions within your category,
• Ensures awareness of Category Contracts in the supply chain,
• Provides advice and support to Project Procurement Leads or Contract Managers prior/post Project Contract awards for category compliance,
• Ensures a diligent and compliant handover to execution
• Defines and implement a clear and robust framework structure for all Category Contracts
• Ensures maintenance of Category Contracts and other meta data in system (Master Data)
• Collaborates with team Senior Contract Manager and Legal Dept., in drafting and negotiating all requirements and provisions in Category Contracts
• Collaborates with Senior Contract Manager in ensuring that Category Contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
• Manages existing Category Contracts, including overseeing and managing;
• Contract performance, progress, and compliance (in collaboration with Project Procurement Leads, Solutions Engineers and technical leads )
• Ensure category benchmarking, and capacity availability
• In collaboration with Solutions Engineers and technical leads identifies, assesses, and manages Category roadmap,
• In collaboration with Supply Chain team and Sales identifies, assess, and manages commercial- and operational optimizing initiatives
• Prepares reports on the status of Category for management
Minor tasks/areas of responsibility:
• Applies best practice for lessons learned to ensure experience exchange and capability building within your Category
• Conduct assignments as assigned by direct manager
You will join a team of highly specialised and motivated employees located in our telecom team in the Products & Technology business area, where we for more than 40 years have supplied telecom solutions to the energy sectors. Our marked is both the Renewable sector and the O&G sectors in Northern Europe, Asia and the USA, which means that you can expect to be involved in projects worldwide
Your primary work location will be in our Gdynia (Poland) office with regular visits to our head office in Esbjerg (Denmark) and occasional to our office in Singapore
The job will involve some travelling to other Semco Maritime offices, sub-suppliers and occasional to sites
You will ensure that all telecom project-related tasks are completed, meeting our high-quality standards, in time and within project contracts
Your key roles and tasks will include:
• Design and engineering of telecom solutions for our energy customers
• Deliver documentation and solutions for systems like CCTV, PAGA, ACS, LTE, TETRA, VHF, UHF, Radio, Radar, Network, Meteorological and similar
• Lead or participate in telecom feed studies and experience in different telecom calculation software such as coverage simulation software (ATDI), CadnaA and similar
• Lead or participate in design and engineering of Telecom Systems in cooperation other specialists
• Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
• Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
• Perform programming and configurations of telecom systems at our facilities
• Perform and participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
• Service, customer support and troubleshooting on delivered projects
• Aids Legal and Procurement in developing contracting standards, contract templates, and guidelines for managing both client and supplier contracts
• Supports Tender Manager and Sales with responses to bids, proposals and contract negotiations
• Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
• In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
• Ensures that contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
• Manages existing client contracts, including overseeing and monitoring;
Contract planning, performance, progress, and milestone achievement (in collaboration with and in support of Project Managers)
o Notifications and key documents (warranties, guaranties, bonds, etc.)
o Contract change management (variations, amendments, addendums, etc.),
o Contract close-out and claims management
• In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
• Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation liabilities
• Prepares reports on the status of contracts for management
• Interface and coordinate with internal and external project team members and document communications between company, subcontractors, suppliers, and clients
• Ensure that the proper document templates are used for contract and change management
• Cooperation with the client and Semco Maritime Document Control
Minor tasks/areas of responsibility:
• Identifies potential improvements to existing policies and contract standards
• Applies best practice for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
• Communicates contract implementations to project teams, Procurement and other stakeholders
Minor duties:
• Conducts special projects as assigned
Key criteria for success:
• Client and key stakeholder requirements are met
• Business and project goals are reached by successful contract implementation
• Contract change management is in control at all times
• Proactive participation in project activities
• Establish correct contract document structure within project systems and tools
You will be responsible for electrical service projects including service, test and verification of e.g., LV breakers as well as LV and MV alternators, transformers and converters. As the primary point of contact for our clients, you will take on the role of project lead, ensuring the successful outcome of each project both in the office and out in the field
Your tasks will include, but are not limited to:
•Providing expert electrical support to clients
•Taking the lead and directing smaller project teams
•Creating and editing technical electrical drawings
•Engineering small modifications, both in preparation for projects and on-site
•Traveling to clients offshore globally, for instance to the Gulf of Mexico, Egypt and South Africa
You will be part of engineering the design of the most optimal electrical architecture based on topics such as cost of construction (CAPEX) vs. cost of operation (OPEX) optimization, availability, and redundancy – as well as guiding our client in making the most optimum overall decision. You will get the needed training and backup from the team
The studies typically cover the entire transmission system i.e., export and array cables layout plus onshore and offshore substations design and structure
Your key roles and tasks will include:
• Contributing to concept, feasibility, and due diligence projects – focus technologies are AC transmission, DC transmission, floating substations and offshore power2x
• Participating in design and calculations as well as grid code compliances
• Contributing to power system studies and load flow calculations
• Executing development tasks in general (improve power studies, concept studies, etc.)
• Engaging with stakeholders internally and eventually externally
Technical Manager, Engineering Studies for Offshore Wind Farms
Kadłubowców 2, Śródmieście, Gdynia
Wygasła: 24.02.2023
full-time
umowa o pracę
full office work
team manager
Obowiązki:
Your overall responsibility is to lead the way in designing the most optimal electrical architecture based on topics such as cost of construction (CAPEX) vs. cost of operation (OPEX) optimization, availability, and redundancy – as well as guiding our client in making the best decisions
The studies typically cover the entire transmission system i.e., export and array cables layout plus onshore and offshore substations design and structure
Your key roles and tasks will include:
• Leading concept, feasibility, and due diligence projects – focus technologies are AC transmission, DC transmission, floating substations and offshore power2x
• Participating in design and calculation responsibilities
• Supporting the sales and business development team, with your technical expertise during meetings with clients
• Assisting sales and business development with the strategy and technical sales
• Executing development tasks in general (improve power studies, concept studies, etc.)
• Engaging with stakeholders internally and externally
As our new Product Architect you will be responsible for ensuring simplicity is embedded in the architectural and design principles of the product line. On a day-to-day basis, you will be working with the Product Line team functions, including Configuration Development, Solutions Development, Digitalisation, and Category Management ensuring integrated outcome
Your tasks will include but are not limited to:
• development and maintenance of architectural and design principles to improve scalability, capacity, and weight & cost performance
• perform and document functional composition and decomposition of the systems in scope
• development and maintenance of the structuring techniques and principles, such as modularisation, systems structure, location structure, product structure, in accordance with the RDS ISO 81346 series of standards
• create work packages for the CPQ development team and act as an interface point towards the business users
• build a catalogue of architectural patterns to support the reuse across the business units
• maintenance of the architecture description framework
• contribute towards the establishment of the single source of truth data practice
Product configuration models:
• Execution of testing framework, processes, and scripts including data testing
• Output documentation in DocGen, Tacton modelling and configuration
Senior Solution Engineer – Control and Communications
Czechosłowacka 3, Śródmieście, Gdynia
Wygasła: 23.02.2023
full-time
umowa o pracę
full office work
senior specialist (Senior)
Obowiązki:
As our new Senior Solution Engineer for Control and Communications you will be responsible for development, implementation, and maintenance of the products and solutions offerings for our offshore substation product line.d solutions offerings for our offshore substation product line
Your tasks will include but are not limited to:
• Control and Communications product and solutions development and maintenance in line with future market requirements
• Technical Authority for Semco Maritime’s Control and Communications solutions offering to the market
• Proposal development based on solution architecture and the client’s requirements
• Coordinate and secure strategic supply chain with Procurement, including cost-out activities
• Develop and maintain the product roadmap with input on new technologies from the supply chain, organization, and the market
• Handover of the as-sold solutions to the project execution team
Electrical Engineer, Engineering Studies for Offshore Wind Farms
Kadłubowców 2, Śródmieście, Gdynia
Wygasła: 23.02.2023
full-time
umowa o pracę
full office work
specialist (Mid / Regular)
Obowiązki:
You will be part of engineering the design of the most optimal electrical architecture based on topics such as cost of construction (CAPEX) vs. cost of operation (OPEX) optimization, availability, and redundancy – as well as guiding our client in making the most optimum overall decision. You will get the needed training and backup from the team
The studies typically cover the entire transmission system i.e., export and array cables layout plus onshore and offshore substations design and structure
Your key roles and tasks will include:
• Contributing to concept, feasibility, and due diligence projects – focus technologies are AC transmission, DC transmission, floating substations and offshore power2x
• Participating in design and calculations as well as grid code compliances
• Contributing to power system studies and load flow calculations
• Executing development tasks in general (improve power studies, concept studies, etc.)
• Engaging with stakeholders internally and eventually externally
• Participates in establishing global category management strategy for the Renewables division,
• Engages with Key Category Suppliers and builds reliable cooperation,
• Ensures Key Category Suppliers involvement in developing and maintaining PL solutions’ availability and market competitiveness,
• Acts as first line of support for all commercial questions within your category,
• Ensures awareness of Category Contracts in the supply chain,
• Provides advice and support to Project Procurement Leads or Contract Managers prior/post Project Contract awards for category compliance,
• Ensures a diligent and compliant handover to execution
• Defines and implement a clear and robust framework structure for all Category Contracts
• Ensures maintenance of Category Contracts and other meta data in system (Master Data)
• Collaborates with team Senior Contract Manager and Legal Dept., in drafting and negotiating all requirements and provisions in Category Contracts
• Collaborates with Senior Contract Manager in ensuring that Category Contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
• Manages existing Category Contracts, including overseeing and managing;
• Contract performance, progress, and compliance (in collaboration with Project Procurement Leads, Solutions Engineers and technical leads )
• Ensure category benchmarking, and capacity availability
• In collaboration with Solutions Engineers and technical leads identifies, assesses, and manages Category roadmap,
• In collaboration with Supply Chain team and Sales identifies, assess, and manages commercial- and operational optimizing initiatives
• Prepares reports on the status of Category for management
Minor tasks/areas of responsibility:
• Applies best practice for lessons learned to ensure experience exchange and capability building within your Category
• Conduct assignments as assigned by direct manager
You will be involved in the construction of offshore substation for windfarms and distribution/transmission projects world-wide. You, together with your team will be responsible for installations, tests and commissioning of mechanical systems such as ventilation systems, cooling systems, fire extinguishing system, diesel generator system and fuel system
Your tasks will include but are not limited to:
• Coordinating and managing daily site activities for 4-10 skilled workers
• Ensuring that the project activities adhere to the schedule and activities are planned accordingly
• Coordinate and plan with installation suppliers
• Purchase and overseeing the timely delivery of materials and coordination with vendors
• Preparing job packages for foremen, updating job package progress and creating progress reports
Senior Solution Engineer – Control and Communications
Czechosłowacka 3, Śródmieście, Gdynia
Wygasła: 25.11.2022
full-time
umowa o pracę
full office work
senior specialist (Senior)
Obowiązki:
As our new Senior Solution Engineer for Control and Communications you will be responsible for development, implementation, and maintenance of the products and solutions offerings for our offshore substation product line.d solutions offerings for our offshore substation product line
Your tasks will include but are not limited to:
• Control and Communications product and solutions development and maintenance in line with future market requirements
• Proposal development based on the architecture framework and the client’s requirements
• Maintain knowledge on market demand and implement product improvements and requirements for product line to fit future projects
• Coordinate and secure strategic supply chain with Procurement, including cost-out activities
• Develop and maintain the product roadmap with input on new technologies from the supply chain, organization, and the market
• Provide supervision and guidance to the development and execution teams
As our new Product Line CPQ Application Engineer/Developer you will be responsible for product configuration models and development, implementation, maintenance, and support of the offshore substation CPQ based on the Tacton software environment. Your day-to-day contacts will be within the Product Line team with peers, architects, managers
Your development and maintenance tasks will include but are not limited to:
• Product configuration models
• Execution of testing framework, processes, and scripts including data testing
• Output documentation in DocGen, Tacton modelling and configuration
You will join a team of highly specialised and motivated employees located in our telecom team in the Products & Technology business area, where we for more than 40 years have supplied telecom solutions to the energy sectors. Our marked is both the Renewable sector and the O&G sectors in Northern Europe, Asia and the USA, which means that you can expect to be involved in projects worldwide
Your primary work location will be in our Gdynia (Poland) office with regular visits to our head office in Esbjerg (Denmark) and occasional to our office in Singapore
The job will involve some travelling to other Semco Maritime offices, sub-suppliers and occasional to sites
You will ensure that all telecom project-related tasks are completed, meeting our high-quality standards, in time and within project contracts
Your key roles and tasks will include:
• Design and engineering of telecom solutions for our energy customers
• Deliver documentation and solutions for systems like CCTV, PAGA, ACS, LTE, TETRA, VHF, UHF, Radio, Radar, Network, Meteorological and similar
• Lead or participate in telecom feed studies and experience in different telecom calculation software such as coverage simulation software (ATDI), CadnaA and similar
• Lead or participate in design and engineering of Telecom Systems in cooperation other specialists
• Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
• Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
• Perform programming and configurations of telecom systems at our facilities
• Perform and participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
• Service, customer support and troubleshooting on delivered projects
Developing, maintaining, and executing the HVDC business/go2market plan in sync with the Renewables Strategic targets
Developing the right, strong relationships and partnerships across equipment manufacturers, fabricators, engineers to enable opportunities and business
Marketing and branding of HVDC as a dedicated offering to the market
As our new Product Line CPQ Application Engineer/Developer you will be responsible for product configuration models and development, implementation, maintenance, and support of the offshore substation CPQ based on the Tacton software environment. Your day-to-day contacts will be within the Product Line team with peers, architects, managers
Your development and maintenance tasks will include but are not limited to:
• Product configuration models
• Execution of testing framework, processes, and scripts including data testing
• Output documentation in DocGen, Tacton modelling and configuration
Senior Solution Engineer – Control and Communications
Czechosłowacka 3, Śródmieście, Gdynia
Wygasła: 19.10.2022
full-time
umowa o pracę
full office work
senior specialist (Senior)
Obowiązki:
As our new Senior Solution Engineer for Control and Communications you will be responsible for development, implementation, and maintenance of the products and solutions offerings for our offshore substation product line.d solutions offerings for our offshore substation product line
Your tasks will include but are not limited to:
• Control and Communications product and solutions development and maintenance in line with future market requirements
• Proposal development based on the architecture framework and the client’s requirements
• Maintain knowledge on market demand and implement product improvements and requirements for product line to fit future projects
• Coordinate and secure strategic supply chain with Procurement, including cost-out activities
• Develop and maintain the product roadmap with input on new technologies from the supply chain, organization, and the market
• Provide supervision and guidance to the development and execution teams
You will carry the full responsibility of the execution of EPCI Projects where you will manage the full project life cycle from the initial contact with the client to delivering the final project
Your tasks will include but are not limited to:
• Full project life cycle management for large renewable projects
• Preparing estimates, offers and calculations during the budget & quotation phase
• Ensuring that the scope and defined objectives are adhered to
• Taking part in establishing the project teams
• Conducting status meetings with the design and construction teams for the project
As our new Senior Solution Engineer for Layout and Architecture systems you will be responsible for development, implementation, and maintenance of the products and solutions offerings for our offshore substation product line
Your tasks will include but are not limited to:
• Layout solutions development and maintenance in line with future market requirements
• Proposal development based on the architecture framework and the client’s requirements
• Maintain knowledge on market demand and implement product improvements and requirements for product line to fit future projects
• Coordinate and secure strategic supply chain with Procurement, including cost-out activities
• Develop and maintain the product roadmap with input on new technologies from the supply chain, organization, structural partners, and the market
• Provide supervision and guidance to the development and execution teams
As our new Senior Solution Engineer for Mechanical systems you will be responsible for development, implementation, and maintenance of the products and solutions offerings for our offshore substation product line
Your tasks will include but are not limited to:
• Product and solutions development and maintenance in line with future market requirements
• Proposal development based on the architecture framework and the client’s requirements
• Maintain knowledge on market demand and implement product improvements and requirements for product line to fit future projects
• Coordinate and secure strategic supply chain with Procurement, including cost-out activities
• Develop and maintain the product roadmap with input on new technologies from the supply chain, organization, and the market
• Provide supervision and guidance to the development and execution teams
You will be part of the value chain, interfacing with multiple disciplines and working on technical solutions ranging from project development to supporting design and development execution throughout all phases of the projects
Your tasks will include but are not limited to:
• Managing the overall project engineering scope for 3D-modelling and layout of offshore substations, such as equipment spacing, supports, cable tray-, pipe- and duct routing
• Multidiscipline coordination of interfaces between disciplines and client clarifications
• 3D reviews and coordinating input from different stakeholders
• Close daily cooperation with our technical designer and structural partners
• Involvement in our product line and tender phase where we develop and configure new solutions and bid on new projects
You will be integral to the sales process for our Offshore Wind offerings; working as part of sales- and tender- team to deliver this from a commercial perspective, the deals will be shaped to represent the commercial interests of both our customers and the business
Your tasks will include but are not limited to:
• Working on multiple high value contracts at any one time
• Working with the Sales & Tender team to develop and drive tenders received from customers; subsequently taking the lead on the on all financial elements of the process including:
• Reviewing, controlling and assisting with consolidating the cost-price and create clarity for all stakeholders through benchmarking and bridging to similar projects
• Ownership the project calculation tool
• Ownership of financial documents during the sales and bidding process
• Clarification, annotation, mark-up and negotiation of Terms & Conditions with financial implications
• Leading financial evaluation of risks and opportunities facing your projects
• Understanding and demonstrate impact of changes on customer business cases for energy projects
• Preparation of project specific sales forecasts and budgets
• Work with the commercial team to establish and implement efficient processes / best practice / continuous improvement
• Hand over of awarded contracts to the project execution organisations
You will join a team of highly specialised and motivated employees located in our telecom team in the Products & Technology business area, where we for more than 40 years have supplied telecom solutions to the energy sectors. Our marked is both the Renewable sector and the O&G sectors in Northern Europe, Asia and the USA, which means that you can expect to be involved in projects worldwide
Your primary work location will be in our Gdynia (Poland) office with regular visits to our head office in Esbjerg (Denmark) and occasional to our office in Singapore
The job will involve some travelling to other Semco Maritime offices, sub-suppliers and occasional to sites
You will ensure that all telecom project-related tasks are completed, meeting our high-quality standards, in time and within project contracts
Your key roles and tasks will include:
• Design and engineering of telecom solutions for our energy customers
• Deliver documentation and solutions for systems like CCTV, PAGA, ACS, LTE, TETRA, VHF, UHF, Radio, Radar, Network, Meteorological and similar
• Lead or participate in telecom feed studies and experience in different telecom calculation software such as coverage simulation software (ATDI), CadnaA and similar
• Lead or participate in design and engineering of Telecom Systems in cooperation other specialists
• Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
• Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
• Perform programming and configurations of telecom systems at our facilities
• Perform and participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
• Service, customer support and troubleshooting on delivered projects
You will be one of the responsible parties for the construction and commissioning activities in the projects such as progress, manning, health & safety, quality and ensuring solutions are lean and optimized as much as possible contributing to the growth and success of renewable business area
Your tasks will include but are not limited to:
• Leading and building the site organisation and accountable for performance on our construction sites
• Leading commissioning activities
• Leading optimisation initiatives to drive competitiveness on cost, technology and digitalisation
• Accountable for HSE performance on site
• Leading the balancing of resource capacity to order book and market demands
You will join our technical LV team located in our Offshore Wind Business area, where we have constructed one of the largest project portfolios within offshore substations in Northern Europe, Our Offshore Wind markets include Europe, Taiwan and the USA, which means that you can expect to be involved in projects worldwide. You will work from out office in Gdynia, Poland. The job will involve some travelling up to 30 days a year. Working from home some days during the month is also an option. You will be part of the value chain, interfacing with multiple disciplines and working on technical solutions ranging from project development to supporting design and development execution throughout all phases of the projects
Your key duties will include:
• In charge of delivering on technical design on time and quality – the main driver of the project
• You will be responsible for some of our LV system, which includes Switchboards, UPS/DC systems, Lighting, Earthing/Bonding, Heat Tracing and Cableways from early start throughout construction phase of the EPC projects
• Responsible for ensuring and reporting document progress & achieving milestones for the LV scope of work within 1 or 2 of our EPC and Product line projects
• Responsible for developing and keeping our technical requirements and specifications up to date with inputs from internal and external stakeholders
• Being a “cultural architect” meaning you will help shaping our culture within the team and organization – A team for us is a group of people that trust each other and enjoy coming to the office
Aids Legal and Procurement in developing contracting standards, contract templates, and guidelines for managing both client and supplier contracts
Supports Tender Manager and Sales with responses to bids, proposals and contract negotiations
Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
Ensures that contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
Manages existing client contracts, including overseeing and monitoring;
- Contract planning, performance, progress, and milestone achievement (in collaboration with and in support of Project Managers)
- Notifications and key documents (warranties, guaranties, bonds, etc.)
In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation liabilities
Prepares reports on the status of contracts for management
Interface and coordinate with internal and external project team members and document communications between company, subcontractors, suppliers, and clients
Ensure that the proper document templates are used for contract and change management
Cooperation with the client and Semco Maritime Document Control
Identifies potential improvements to existing policies and contract standards
Applies best practice for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
Communicates contract implementations to project teams, Procurement and other stakeholders
Preparing basic and detailed design and philosophy for protection systems for onshore and offshore wind farm substations
Reviewing suppliers’ detailed protection design documents, IEC61850 design, protection system schematics, relay configuration, and factory acceptance tests and site acceptance test procedures and reports
Prepare technical documentation as purchase specifications, cable lists, control descriptions, design briefs, interlocking logic and CT/VT calculation etc. for protection related delivery in accordance with internal and contract requirements
Working with protection relay and/or RTU, programming and configuration of substation automation systems. Both for large offshore wind projects and for Danish utility companies
Knowledge or interest in working with common database engineering software solution (COMOS) for electrical engineering
Participate in execution and sign-off of factory (FAT) and site (SAT) tests are carried out with end customers, aligned and according to the overall project plan
Participation in concept development, optimization, and standardization of technical solutions
Design and engineering of network solutions for our energy customers
Deliver solutions like network architecture, OT security design, Cisco configuration of network devices, documentation etc
Lead design and engineering of Network and Telecom Systems in cooperation with internal specialists for each specific area
Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
Design and setup/program network equipment (Cisco) and ensure that the settings fulfill the OT-requirements and customers specification
Perform and Participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
Service, customer support and troubleshooting on delivered projects
You will join a team of highly specialised and motivated employees located in our telecom team in the Products & Technology business area, where we for more than 40 years have supplied telecom solutions to the energy sectors. Our marked is both the Renewable sector and the O&G sectors in Northern Europe, Asia and the USA, which means that you can expect to be involved in projects worldwide
Your primary work location will be in our Gdynia (Poland) office with regular visits to our head office in Esbjerg (Denmark) and occasional to our office in Singapore
The job will involve some travelling to other Semco Maritime offices, sub-suppliers and occasional to sites
You will ensure that all telecom project-related tasks are completed, meeting our high-quality standards, in time and within project contracts
Your key roles and tasks will include:
• Design and engineering of telecom solutions for our energy customers
• Deliver documentation and solutions for systems like CCTV, PAGA, ACS, LTE, TETRA, VHF, UHF, Radio, Radar, Network, Meteorological and similar
• Lead or participate in telecom feed studies and experience in different telecom calculation software such as coverage simulation software (ATDI), CadnaA and similar
• Lead or participate in design and engineering of Telecom Systems in cooperation other specialists
• Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
• Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
• Perform programming and configurations of telecom systems at our facilities
• Perform and participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
• Service, customer support and troubleshooting on delivered projects
Implementing client specific requirements in substation design for multiple subsystems like SCADA, low-voltage, HVAC, etc
Contribute with the implementation of best practice & industry accepted security architecture on solution level typically based on standards like IEC 62443 & NERC CIP
Reviewing ITT packages and providing input to tenders consisting of calculations, descriptions, clarifications, and reservations
Analyse and provide SCADA solution proposals for customers
Provide technical documentation of the Cybersecurity solutions
Data Network Architecture
Collecting and managing subsystem documentation
Executing FAT/SAT tests for both sub systems and common infrastructure
Coordination and planning with external stakeholders
As our engineering manager, you assume full technical responsibility of substation engineering projects as well as securing alignment between engineering disciplines. You will establish a clear project scope from the outset and ensure that project members carry out the assignments according to contract, schedules, specifications, and legislation
To do so, it is up to you to create a productive work environment for your engineering team as well as regularly communicating the project status, milestones, and key performance indicators etc. Furthermore, your role as our engineering manager entails:
• Preparation of estimates, offers and calculations during the budget and quotation phase
• Organising resources, planning, coordinating, and following up on the project
• Assisting the project manager in customer meetings on a regular basis
• Assisting Procurement during sub-supplier negotiations
• Ensuring delivery of all engineering documents and final documentation
• Identifying all changes in SOW and informing PM of changes in terms of time and economy
Vital contacts:
Project Management Department, Engineering Department, Sales Department
We are strongly driven by standards and regulations but also focusing on business opportunities in terms of products and features creating value
Your tasks will include but are not limited to:
• Implementing client specific requirements in substation design for multiple subsystems like SCADA, low-voltage, HVAC, etc
• Contribute with the implementation of best practice & industry accepted security architecture on solution level typically based on standards like IEC 62443 & NERC CIP
• Reviewing ITT packages and providing input to tenders consisting of calculations, descriptions, clarifications, and reservations
• Analyse and provide SCADA solution proposals for customers
• Provide technical documentation of the Cybersecurity solutions
• Data Network Architecture
• Collecting and managing subsystem documentation
• Executing FAT/SAT tests for both sub systems and common infrastructure
• Coordination and planning with external stakeholders
The job will involve limited travelling to other Semco Maritime offices, sub-suppliers, and customers (+30 days)
Aids Legal and Procurement in developing contracting standards, contract templates, and guidelines for managing both client and supplier contracts
Supports Tender Manager and Sales with responses to bids, proposals and contract negotiations
Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
Ensures that contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
Manages existing client contracts, including overseeing and monitoring;
- Contract planning, performance, progress, and milestone achievement (in collaboration with and in support of Project Managers)
- Notifications and key documents (warranties, guaranties, bonds, etc.)
In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation liabilities
Prepares reports on the status of contracts for management
Interface and coordinate with internal and external project team members and document communications between company, subcontractors, suppliers, and clients
Ensure that the proper document templates are used for contract and change management
Cooperation with the client and Semco Maritime Document Control
Identifies potential improvements to existing policies and contract standards
Applies best practice for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
Communicates contract implementations to project teams, Procurement and other stakeholders
You will join our technical LV team located in our Offshore Wind Business area, where we have constructed one of the largest project portfolios within offshore substations in Northern Europe, Our Offshore Wind markets include Europe, Taiwan and the USA, which means that you can expect to be involved in projects worldwide. You will work from out office in Gdynia, Poland. The job will involve some travelling up to 30 days a year. Working from home some days during the month is also an option. You will be part of the value chain, interfacing with multiple disciplines and working on technical solutions ranging from project development to supporting design and development execution throughout all phases of the projects
Your key duties will include:
• In charge of delivering on technical design on time and quality – the main driver of the project
• You will be responsible for some of our LV system, which includes Switchboards, UPS/DC systems, Lighting, Earthing/Bonding, Heat Tracing and Cableways from early start throughout construction phase of the EPC projects
• Responsible for ensuring and reporting document progress & achieving milestones for the LV scope of work within 1 or 2 of our EPC and Product line projects
• Responsible for developing and keeping our technical requirements and specifications up to date with inputs from internal and external stakeholders
• Being a “cultural architect” meaning you will help shaping our culture within the team and organization – A team for us is a group of people that trust each other and enjoy coming to the office
Close collaboration with team and relevant stakeholders
Your work will be crucial to the execution of automation projects in specification, design, construction, commissioning, and as-built documentation as well as coordinating the work and interfaces
Ensuring project design according to the rules and standards
Carrying out tests on subcontractors designs and participating in onsite commissioning
Interacting with customers and your team to create proposals and technical solutions for multidisciplinary projects
Project participation throughout all phases from the early design stages to site acceptance testing
Ad-hoc tasks related problem-solving on costumer or subcontractor sites
Your overall responsibility will be to ensure that EPC tenders are conducted in accordance with company guidelines and industry best practice and that they are in line with corporate goals and objectives. Furthermore, you will be given the following tasks and responsibilities:
• Manage, coordinate and monitor the assigned EPC tenders
• Communication and coordination with all stakeholders in the tender process
• Perform review of ITT and organize internal workshops to develop the technical solution
• Manage tenders with overall focus on technical configuration
• Support on commercial and legal issues
• Role model for executing tenders according to the Semco processes
• Prepare and participate the internal approvals, customer clarifications and contract negotiations
• Identify and Incorporate lessons learned from previous tenders and projects
• Prepare and review cost benchmarking against previous tenders and projects
• Ensure that procedures for quality control and approval are included in the tender sub-process
• Facilitate, identify and incorporate any risks and opportunities in the tender
• Designing the program together with technical adviser, project planner and tender team
• Designing the execution plan together with the technical adviser
You will carry the full responsibility of the execution of EPCI Projects where you will manage the full project life cycle from the initial contact with the client to delivering the final project
Your tasks will include but are not limited to:
• Full project life cycle management for large renewable projects
• Preparing estimates, offers and calculations during the budget & quotation phase
• Ensuring that the scope and defined objectives are adhered to
• Taking part in establishing the project teams
• Conducting status meetings with the design and construction teams for the project
At Semco Maritime, you will be part of an evolving and dynamic working culture. Add to this a challenging and exciting workday where results are created together based on a high level of professionalism and dedication. We win as a team!
Semco Maritime is an attractive workplace with an informal environment based on a high degree of freedom and trust, as we believe this better unleashes high performance
Your responsibilities
You will join a team of highly specialised and motivated employees located in our telecom team in the Products & Technology business area, where we for more than 40 years have supplied telecom solutions to the energy sectors. Our marked is both the Renewable sector and the O&G sectors in Northern Europe, Asia and the USA, which means that you can expect to be involved in projects worldwide
Your primary work location will be in our Gdynia (Poland) office with regular visits to our head office in Esbjerg (Denmark) and occasional to our office in Singapore
The job will involve some travelling to other Semco Maritime offices, sub-suppliers and occasional to sites
You will ensure that all telecom project-related tasks are completed, meeting our high-quality standards, in time and within project contracts
Your key roles and tasks will include:
• Design and engineering of telecom solutions for our energy customers
• Deliver documentation and solutions for systems like CCTV, PAGA, ACS, LTE, TETRA, VHF, UHF, Radio, Radar, Network, Meteorological and similar
• Lead or participate in telecom feed studies and experience in different telecom calculation software such as coverage simulation software (ATDI), CadnaA and similar
• Lead or participate in design and engineering of Telecom Systems in cooperation other specialists
• Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
• Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
• Perform programming and configurations of telecom systems at our facilities
• Perform and participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
• Service, customer support and troubleshooting on delivered projects
Your largest responsibility as a Construction Manager at Semco Maritime is ensuring that the projects are built safely and within the agreed timeframe and budget. Furthermore, you will be the HSE example everybody needs to look up to and is responsible for upholding safety standards together with the HSE supervisor
Your tasks will include but are not limited to:
• Preparing and planning all site activities, including resource planning
• Creating job packages for site installation activities
• Organize and perform day-to-day management of the construction work
• Client interface and project meetings
• Developing weekly status and progress reports
• Ensure compliance with the project schedule
• Ensure that quality of the work follows requirements
Aids Legal and Procurement in developing contracting standards, contract templates, and guidelines for managing both client and supplier contracts
Supports Tender Manager and Sales with responses to bids, proposals and contract negotiations
Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
Ensures that contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
Manages existing client contracts, including overseeing and monitoring;
- Contract planning, performance, progress, and milestone achievement (in collaboration with and in support of Project Managers)
- Notifications and key documents (warranties, guaranties, bonds, etc.)
In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation liabilities
Prepares reports on the status of contracts for management
Interface and coordinate with internal and external project team members and document communications between company, subcontractors, suppliers, and clients
Ensure that the proper document templates are used for contract and change management
Cooperation with the client and Semco Maritime Document Control
Identifies potential improvements to existing policies and contract standards
Applies best practice for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
Communicates contract implementations to project teams, Procurement and other stakeholders
As a Tender Coordinator, you will be responsible for developing, managing and continuously improving our contract management processes and, when assigned to specific projects, implementing and managing these processes and fulfilling the duties as described below
• In collaboration with the Project Management Team identify, assess and manage contract risks with a focus on commercial risks
• Coordinate with Cost Control and Finance to ensure proper cost accounting, invoicing and milestone payments
• Prepare management reports on the status of project contracts
• Interface and coordinate with internal and external project team members and document communication between company, subcontractors, suppliers and clients
• Cooperate with client’s Contract Manager and Document Control
As our new Site Manager, you will be joining our Renewables Division where we handle several large-scale multidiscipline projects. You will be working from our Site in. You will report directly to the Construction Manager who is responsible for the overall site
We expect the activities on-site to begin during July/August which is when we expect you to start. This position is open to being a contracted position as a project hire with the duration of the project, or a permanent position depending on the candidate
Your primary responsibilities will be planning, coordinating and managing daily site activities, and together with your team of foremen you will lead 80-100 blue collar workers daily
Your tasks will include but are not limited to:
• Ensuring that the project activities adhere to the schedule and activities are planned accordingly
• Supporting the Construction Manager for the site with HSE management
• Overseeing the timely delivery of materials and coordination with vendors
• Preparing job packages for foremen, updating job package progress and creating progress reports
Project execution of substation automation projects in tender, specification, design, construction and commission phases and subsequently handover of project to client and O&M organization
Knowledge and interest in SCADA and PLC systems, programming, configuration and HMI of substation automation systems
Specification of hardware and software
Knowledge to interface protocols (Modbus, Profinet etc.)
Prepare technical documentation such as design brief, technical procurement specification, design basis for control panel design, connection diagrams, wiring diagrams, signal lists, cable lists, equipment lists etc. for control and automation related delivery in accordance with internal and contract requirements
Multidiscipline co-operation
Design and engineering according to required international codes and standards
Knowledge or interest in working with common database engineering software solution (COMOS) for engineering of substations
Participate in execution and sign-off of factory (FAT) and site (SAT) tests carried out with customers, aligned and according to the overall project plan
Participation in concept development, optimization and standardization of technical solutions
Aids Legal and Procurement in developing contracting standards, contract templates, and guidelines for managing both client and supplier contracts
Supports Tender Manager and Sales with responses to bids, proposals and contract negotiations
Collaborates with Procurement on ensuring alignment between client contract requirements and supply chain sourcing and contracting
In collaboration with Legal, reviews all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations as well as company policies and procedures
Ensures that contracts are executed in accordance with company guidelines and industry best practice and are in line with corporate goals, objectives
Manages existing client contracts, including overseeing and monitoring;
- Contract planning, performance, progress, and milestone achievement (in collaboration with and in support of Project Managers)
- Notifications and key documents (warranties, guaranties, bonds, etc.)
In collaboration with Project Manager, identifies, assesses, and manages contract risks, with a focus on commercial risks
Coordinates with Cost Control and Finance to ensure correct cost accounting, invoicing, cash flow and cancellation liabilities
Prepares reports on the status of contracts for management
Interface and coordinate with internal and external project team members and document communications between company, subcontractors, suppliers, and clients
Ensure that the proper document templates are used for contract and change management
Cooperation with the client and Semco Maritime Document Control
Identifies potential improvements to existing policies and contract standards
Applies best practice for lessons learned to ensure experience exchange and capability building for other Contract Managers and Procurement staff
Communicates contract implementations to project teams, Procurement and other stakeholders
Design and engineering of network solutions for our energy customers
Deliver solutions like network architecture, OT security design, Cisco configuration of network devices, documentation etc
Lead design and engineering of Network and Telecom Systems in cooperation with internal specialists for each specific area
Knowledge or interest in working with common database engineering software solution (like COMOS or similar) for interface engineering
Responsible for securing technical requirements and interfaces from internal and external stakeholder within deadlines
Design and setup/program network equipment (Cisco) and ensure that the settings fulfill the OT-requirements and customers specification
Perform and Participate in execution and sign-off of factory (FAT) and site (SAT) tests with end customers, aligned and according to the overall project plan
Service, customer support and troubleshooting on delivered projects
You will primarily advise the company within a broad and interesting range of legal work, especially related to the offshore substation/renewable energy’s area. We want our lawyers to have as much exposure to the business as possible, therefore you will be advising the business directly on a wide variety of commercial, legal and risk management issues
Your tasks will include but are not limited to:
• Providing high quality legal advice
• Influencing decisions regarding commercial and risk issues
• Drafting and negotiating commercial contracts, sometimes with demanding deadlines
As electrical power team member you will be the part of our Offshore Wind division, which has constructed one of the largest project portfolios within offshore substations in Northern Europe
In the role as Electrical Engineer your key responsibilities will include:
Support design and dimensioning of LV Power systems including switchboards, UPS systems, Lighting, Earthing/Bonding, Heat Tracing and Cableways from early start throughout construction
Through interactions with customers and your team, you can create technical descriptions and proposals
Through collaboration with subcontractors and your team you will create technical design documentation for our clients and the on-site installation team
Participating in FAT/SAT tests worldwide
Being part of our tender process where we quote and bid for new projects
Perform Requisition-to-Purchase Order process within IFS
Handling of the sourcing process for goods and services to Renewables and projects
Expediting of orders to ensure on-time deliveries
Handling of internal and external correspondence related to the procurement
Update IFS with order, invoicing, and supplier information
Interface and coordinate with internal and external project team members and document communications between Semco Maritime, subcontractors, suppliers, and clients
Establish and maintain procurement plans at the direction of, and in collaboration with the Project Manager
Ensure that the proper document templates are used for the project
Ad hoc assignments within the Procurement Department and Semco Maritime Poland office